Questions? Contact us at
This part is also used on the top of the heating exchanger (on the boiler).
Fits: Most Elektra Commercial machines. On models with an exposed grouphead, see…
Elektra Viton O-Ring for top of grouphead
Located under the nut 00026014 or 00921021
This O-Ring is also used for the top of the heating exchanger on Commercial Machines, as well as on…
Elektra Grouphead Spring for Filter
Located inside the grouphead top holding in place the filter around the gigleur.
Elektra Grouphead Spring Support
Located inside the grouphead top holding in place the spring of the filter around the gigleur.
Elektra Grouphead Gigleur Screen Filter
Fits: Commercial grouphead
This screen protects the gigleur from being clogged by particles of scale and other debris.
Elektra Grouphead Gigleur
5mm Thread size diameter
This is also called an Injector, and it controls the flow of water in the grouphead—and therefore, combined with the…
Support for Gigleur
Thread size 5mm
Elektra Group to Bell Bolt, Stainless Steel
For complete replacement, each grouphead needs three (3).
Grouphead Shower Screen Screw, Stainless Steel
This screw is the original 16mm length chosen by Elektra. If your grouphead bell is old and the female threads inside are not grabbing well, we…
Elektra Grouphead Shower Screen
Also called Dispersion Screen
Grouphead screens will wear out over time, or become clogged if not properly cleaned, and should therefore be replaced…
P.O. Box 355
Elmira, OR 97437
Copyright © 2004-2017 Stefano's Espresso Care
All Rights Reserved/
Your Profile has been updated.