Questions? Contact us at
Vibiemme Over Pressure Valve Kit
All the necessary parts to rebuild your Vibiemme Over Pressure Valve:
Gauge for grouphead Pressure
Steam/Boiler Pressure Gauge
Note: This gauge replaces the previous steam gauge scaled from 0-2.5
Pressurestat Jaeger 1/4 BSP fitting
Originally mounted on Vibiemme / VBM DB (current temperature sensor version)
This pressurestat is considered an upgrade and superior…
Boiler Safety Valve, 3/8 BSP
Certified and Calibrated
Anti-Vacuum Valve with 8mm Barbed Fitting
A new style of Anti-Vacuum Valve (also called anti-suction valve) which can be used as is, or it can have a silicone hose attached to channel…
Heavier Plunger than the standard valves found in most espresso machines.
Fits: Any machine with a 1/4BSP DEEP fitting.
28mm Total Height 18mm Exposed.
Anti-Vacuum Valve, Long Type
This valve is considered more reliable than the “flat type.”
Fits: Any machine with a 1/4 BSP fitting.
38mm Total Height 30mm Exposed.
Upper Boiler Fitting
Fits: Vibiemme Domobar Super Heating Exchanger
This fitting is located on top of the boiler, and it used to connect the Steam Valve Pipe, Gauge and Pressurestat Pipe.
Boiler Water Level Probe
This probe is 140mm long, but it can be cut to any specific length.
Standard 1/4 BSP fitting.
NOTE: Although in most applications, the standard 1/4 BSP…
Vibiemme Safety Thermostat, Manually Resettable
Also called Glixon
Cuts off power to the Heating Element when over heating occurs.
Fits: Heating Exchanger Models
Vibiemme Heating Element 115V 1600W
1.25” BSP male threads (41.6mm)
Fits: All versions of Domobar SUPER HEATING EXCHANGERS. This element will NOT fit Double Boiler models.
Heating Element Gasket, Teflon
Fits: Bigger Size Heating Elements 1 1/4” BSP (41mm ID)
Vibiemme One Way Valve
Also called Check Valve
1/8 M to 1/8 M BSP fittings; 68mm overall length
Ulka Pump Autostart Breather Valve
Also called air bleeder valve.
Normally located on the output side of Ulka vibrating pump.
Most manufacturers install an O-Ring (sold separately)…
Air Bleeder Valve
This Solid Brass valve self primes the system when air enters the water line. The return side output is smaller then the plastic valve found in some early versions, so…
O-Ring for Autostart Valve/Bleeder Valve
Fits: Between the Ulka Pump and the Valve
Ulka Vibrating Pump
Model EA Type EAX5 1/1.5 min.
BRASS Straight Fitting 1/8BSP
Fits: Many home unit machines.
Please Note: This Item is tested by the manufacturer…
Rubber Support for Vibrating Pump
135mm Hole Diameter.
Sold Individually (2 are needed for each vibrating pump)
Pump Thermal Fuse
This Thermal Cut-Off is located on ULKA vibrating pumps to prevent overheating.
When a pump runs continuously for more then 10 minutes or so, the pump coil could…
Vibiemme Adjustable Bypass Valve
Also called Over Pressure Valve (OPV)
1/8BSP Male to 1/8BSP Female
NOTE: This is a newer version, it is 64mm long, the smaller one used previously…
3mm hole size
Can be placed inside the Thermosyphon pipe for an additional “tweak” of the temperature.
Full size Pressurestat
25Ampere PS 325-1C-SX
PARKER UL Approved
1/4 BSP fitting
100mm Length x70mm Width x98mm Height (includes fitting)
Full Size SIRAI Pressurestat
SIRAI is the most common and recognized name in this type of product.
30 Ampere Model P302-6, 100mm L x 60mm W x98mm H (includes fitting)
Thermal Grease/Heat-Sink Compound
Used for thermostats, relays and any other components that need a thermal seal with a surface and better heat transfer dissipation.
1 gram packet
Ulka Pump Support Saeco
Fits: Ulka Pump
NEEDS 2 (TWO) for each pump
2-Way Inlet Solenoid Valve PARKER
115v Full Size
1/8 fitting BSP
Vibiemme Stainless Steel Braided Hose 120cm Long
This hose has a 1/8 BSP Female Fitting for the machine side and a 3/8 BSP Male for the inlet side.
NOTE: Some batches of machines were…
Vibiemme Water Level Probe Assembly
120mm long, can be cut to accommodate smaller boilers.
Fits: All Manual E-61 Models and Versions of
Vibiemme Domobar Super
Vibiemme Domobar Super Fitting 1/8 BSP to 1/8 Flare for OPV HeEx
Teflon Gasket 1/4BSP
can be use for standard anti-vacuum valves and water level probes and any other application for 1/4BSP ID
P.O. Box 355
Elmira, OR 97437
Copyright © 2004-2019 Stefano's Espresso Care
All Rights Reserved/
Your Profile has been updated.