Questions? Contact us at
Vibiemme Over Pressure Valve Kit
All the necessary parts to rebuild your Vibiemme Over Pressure Valve:
Ulka Vibrating Pump
Model EA Type EAX5 1/1.5 min.
BRASS Straight Fitting 1/8BSP
Fits: Many home unit machines.
Please Note: This Item is tested by the manufacturer…
Pump Thermal Fuse
This Thermal Cut-Off is located on ULKA vibrating pumps to prevent overheating.
When a pump runs continuously for more then 10 minutes or so, the pump coil could…
Rubber Support for Vibrating Pump
135mm Hole Diameter.
Sold Individually (2 are needed for each vibrating pump)
Ulka Pump Autostart Breather Valve
Also called air bleeder valve.
Normally located on the output side of Ulka vibrating pump.
Most manufacturers install an O-Ring (sold separately)…
Air Bleeder Valve
This Solid Brass valve self primes the system when air enters the water line. The return side output is smaller then the plastic valve found in some early versions, so…
O-Ring for Autostart Valve/Bleeder Valve
Fits: Between the Ulka Pump and the Valve
Pressurestat Jaeger 1/4 BSP fitting
Originally mounted on Vibiemme / VBM DB (current temperature sensor version)
This pressurestat is considered an upgrade and superior…
Full size Pressurestat
25Ampere PS 325-1C-SX
PARKER UL Approved
1/4 BSP fitting
100mm Length x70mm Width x98mm Height (includes fitting)
Full Size SIRAI Pressurestat
SIRAI is the most common and recognized name in this type of product.
30 Ampere Model P302-6, 100mm L x 60mm W x98mm H (includes fitting)
Vibiemme One Way Valve
Also called Check Valve
1/8 M to 1/8 M BSP fittings; 68mm overall length
Vibiemme Adjustable Bypass Valve
Also called Over Pressure Valve (OPV)
1/8BSP Male to 1/8BSP Female
NOTE: This is a newer version, it is 64mm long, the smaller one used previously…
Control Box PID 115v
Fits: Vibiemme Double Boiler Manual ‘Levetta” PRE-2011 Version
for other versions see:
In-Tank Water Softener.
The Italian supplier sends different versions of this softener almost every batch. Although they might not look the same as the image, they…
Reservoir Filter Screen for Silicone Hose, a redesigned version from the previous style, which is no longer available.
This screen attaches to the inlet silicone hose to prevent solid…
Ulka Pump Support Saeco
Fits: Ulka Pump
NEEDS 2 (TWO) for each pump
2-Way Inlet Solenoid Valve PARKER
115v Full Size
1/8 fitting BSP
Vibiemme Stainless Steel Braided Hose 120cm Long
This hose has a 1/8 BSP Female Fitting for the machine side and a 3/8 BSP Male for the inlet side.
NOTE: Some batches of machines were…
Vibiemme 1/8 Male to 1/8 Female BSP Elbow Fitting
P.O. Box 355
Elmira, OR 97437
Copyright © 2004-2019 Stefano's Espresso Care
All Rights Reserved/
Your Profile has been updated.